http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- Correct, but when you have a CB report prepared - by whomever - that report is based on IEC standards not UL, BSI or whatever. UL's report format is very "CB" looking in format etc, and is only for the US (or North America if its a bi-national standard). In the reference section you will see either UL65000 for a UL report, or if its a CB report it will state IEC 60065. Check to see if it says, CB report or UL report - and you'll have to pay for each even though they are very similar. Gary
From: Brian O'Connell [mailto:[email protected]] Sent: Monday, July 12, 2004 9:48 AM To: [email protected] Subject: RE: standards quoted on EU D of C http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- NO There are no UL standards listed in the LVD. luck, Brian -----Original Message----- From: James, Chris [ mailto:[email protected]] Sent: Monday, July 12, 2004 9:37 AM To: [email protected] Subject: standards quoted on EU D of C If a product has been CB certified by UL, using UL60065 for LVD, is it valid and permissible to quote UL60065 on an EU declaration of conformity? Regards, Chris ____________________________________________________ Chris James Engineering Services Manager Dolby Laboratories, Inc. ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
