From: Nick Williams [mailto:[email protected]] Sent: 28 January 2005 09:55 To: White, Ian Subject: RE: test equipment standards
Ian, EN 60730 is a perfectly adequate standard for this application. If it is not adequate for an industrial environment, then it will be because of factors which neither EN 61010 nor EN 60950 will be any better at dealing with (e.g high levels of dirt and damp and mechanical abuse). Regards Nick. P.S. I can't e-mail from my normal address since I am travelling at present, so this has not been posted to the Group, but you may wish to forward it so it forms part of the wider debate. At 8:42 am +0000 28/1/05, White, Ian wrote: > >Forum members. > >All the talk about LVD standards has come at a good time. We have a >supplier of electric actuators who in their D of C give >EN60730-1:1995 - which is Automatic electrical controls for >household and similar use - Part 1 General requirements. > >The supplier sells them into household and industrial environments, >and my company would sell them exclusively into industrial >environments. I had taken the view this was the wrong standard to >comply with, and they should be looking at EN61010 -1 or EN60950-1. > >Could l have your views please > >Thanks for your help > >Ian White. > > __________________________________________________________________________ DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the original addressee(s). Access to this message by anyone else is unauthorised. If you are not the intended original recipient(s), any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. If you have received this message in error, please immediately contact the sender by return email or telephone Spirax Sarco Ltd on +44(0)1242 521361. If you are not the intended recipient of this email and you have received it through forwarding or in error you should delete it and make no copies. We have taken all reasonable steps to protect files from viruses, but do not warrant that this e-mail and any attachments are virus free. You should take full responsibility for virus checking. Thank you. Company Reg No : 509018 Reg Office : Spirax Sarco Ltd, 130-132 St Georges Rd, Cheltenham, UK __________________________________________________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
