In message <4DA8FE10C88F443E988CA5E66A960CE9@christopher>, dated Thu, 18
Jul 2013, Chris Wells <radioactive55...@comcast.net> writes:
what standard would be best to use to validate/control the CT
production as a separate independent component?
There is an IEC standard specifically for current transformers and it
does address safety issues. IEC 60044-8. There is also the general
transformer standard, of which IEC 61558-1, -2.4 and -2.6 may be
applicable.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
Why is the stapler always empty just when you want it?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
