I looked for a Directive (Citation in OJEU) and the standards used. Directive 765/2008 setting out the requirements for accreditation and market surveillance relating to the marketing of Products was modified by Regulation (EC) No 1221/2009; This specifies (voluntary participation) using EN ISO/IEC 17050-1:2010., -2:2010.
BSI has this listing: BS EN ISO/IEC 17050-1:2010 replaced BS EN ISO/IEC 17050-1:2004 replaced BS EN 45014:1998 ISO has this listing: ISO/IEC 17050-1:2004 Replacing ISO/IEC Guide 22:1996 So I will need to order up the 2010 editions for the coming holidays. Our DoC issue in 2002 was not signing them in Blue ink. Chuck McDowell Meyer Sound Laboratories Inc. -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Thursday, November 14, 2013 9:29 PM To: [email protected] Subject: Re: [PSES] Rejected Manufacturer Declarations In message <1d8b4eb0ebe341ff90686842f3f7d...@blupr02mb116.namprd02.prod.outlook.com> , dated Thu, 14 Nov 2013, Brian Oconnell <[email protected]> writes: >Is EN45014 still applicable? It doesn't seem to have been withdrawn. >Is ISO17050-1,-2 the correct ref? For Europe, not 'correct' unless it's been adopted by CEN/CENELEC as EN ISO 17050... However, DoCs compliant with it would be accepted in most countries. > >Another question - have been told by (Yet Another Import Authority) >that these standards represent the minimum required information, and >additional stuff not necessarily excluded. Comments? Certainly true for EN 45014, which is a recommendation. But information deemed misleading would not be tolerated. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Nondum ex silvis sumus John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> NOTICE: This email may contain confidential information. Please see http://www.meyersound.com/confidential/ for our complete policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
