All,
Differences between EEC, EC, and EU.
Upon the entry into force of the Maastricht Treaty in 1993, the EEC was
renamed the European Community (EC) to reflect that it covered a wider range
of policy. This was also when the three European Communities, including the
EC, were collectively made to constitute the first of the three pillars of
the European Union (EU), which the treaty also founded. The EC existed in
this form until it was abolished by the 2009 Treaty of Lisbon, which merged
the EU's former pillars and provided that the EU would "replace and succeed
the European Community."
thanks, –doug
Douglas E Powell
http://www.linkedin.com/in/dougp01
-----Original Message-----
From: John Woodgate
Sent: Monday, November 18, 2013 2:14 PM
To: [email protected]
Subject: Re: [PSES] Rejected Manufacturer Declarations
In message <[email protected]>, dated Mon, 18
Nov 2013, Douglas Nix <[email protected]> writes:
I suspect (John Woodgate please correct me here), that either is accepted,
but “EU” is current and “more correct”.
Once again, a search for an 'official' answer' proved futile. However, I
believe 'EU' is to be used.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in
well-used formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to
unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
