Thanks, Doug! Nice to have a more definitive answer with a solid legal basis.
Doug Nix On 18-Nov-13, at 16:23, Doug Powell <[email protected]> wrote: > All, > > Differences between EEC, EC, and EU. > > Upon the entry into force of the Maastricht Treaty in 1993, the EEC was > renamed the European Community (EC) to reflect that it covered a wider range > of policy. This was also when the three European Communities, including the > EC, were collectively made to constitute the first of the three pillars of > the European Union (EU), which the treaty also founded. The EC existed in > this form until it was abolished by the 2009 Treaty of Lisbon, which merged > the EU's former pillars and provided that the EU would "replace and succeed > the European Community." > > > thanks, –doug > > Douglas E Powell > http://www.linkedin.com/in/dougp01 > > > > -----Original Message----- From: John Woodgate > Sent: Monday, November 18, 2013 2:14 PM > To: [email protected] > Subject: Re: [PSES] Rejected Manufacturer Declarations > > In message <[email protected]>, dated Mon, 18 > Nov 2013, Douglas Nix <[email protected]> writes: > >> I suspect (John Woodgate please correct me here), that either is accepted, >> but “EU” is current and “more correct”. > > Once again, a search for an 'official' answer' proved futile. However, I > believe 'EU' is to be used. > -- > OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk > Nondum ex silvis sumus > John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
