Gentlemen, Thanks for your excellent contributions to this discussion. I decided to take the total discussion and write a blog post that summarizes the requirements. I’ve acknowledged all of you. Here’s the link: http://machinerysafety101.com/2013/11/20/understanding-european-declarations-conformity-incorporation/
Thanks again! Doug Nix On 18-Nov-13, at 17:40, Douglas Nix <[email protected]> wrote: > Thanks, Doug! Nice to have a more definitive answer with a solid legal basis. > > Doug Nix > > On 18-Nov-13, at 16:23, Doug Powell <[email protected]> wrote: > >> All, >> >> Differences between EEC, EC, and EU. >> >> Upon the entry into force of the Maastricht Treaty in 1993, the EEC was >> renamed the European Community (EC) to reflect that it covered a wider range >> of policy. This was also when the three European Communities, including the >> EC, were collectively made to constitute the first of the three pillars of >> the European Union (EU), which the treaty also founded. The EC existed in >> this form until it was abolished by the 2009 Treaty of Lisbon, which merged >> the EU's former pillars and provided that the EU would "replace and succeed >> the European Community." >> >> >> thanks, –doug >> >> Douglas E Powell >> http://www.linkedin.com/in/dougp01 >> >> >> >> -----Original Message----- From: John Woodgate >> Sent: Monday, November 18, 2013 2:14 PM >> To: [email protected] >> Subject: Re: [PSES] Rejected Manufacturer Declarations >> >> In message <[email protected]>, dated Mon, 18 >> Nov 2013, Douglas Nix <[email protected]> writes: >> >>> I suspect (John Woodgate please correct me here), that either is accepted, >>> but “EU” is current and “more correct”. >> >> Once again, a search for an 'official' answer' proved futile. However, I >> believe 'EU' is to be used. >> -- >> OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk >> Nondum ex silvis sumus >> John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected]> >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher: <[email protected]> >> David Heald: <[email protected]> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <[email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Scott Douglas <[email protected]> >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher: <[email protected]> >> David Heald: <[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
