Hi Jody, It is stated in OJEU under EN 60950-1 A2.
For radio equipment, the voltage limit of LVD is removed in both R&TTED and RED. Can you point me to where the end product standards and CB Scheme call up EN 62133 2013. Cl 8.3.9 is only applied to France in EU and definitely not a harmonised standard. It is a speculation that some time ago, the global battery recalls lied on internal short circuit due to contamination in production on almost all rechargeable battery pack in NBs. It is disappointed that only two major countries, Japan and Korea who produce major share of rechargeable batteries are willing to adopt the new requirement. Thus battery recalls still continue and luckily in a smaller scale. Regards, Scott On 27 April 2016 at 00:49, Leber, Jody (Suwanee) <[email protected]> wrote: > Hi Scott, > > > > I actually thought the dow was in October. Where did you see the July > date? I do not believe it is any Directive as most batteries are outside > of the scope of the LVD. You will find in end product standards and it is > required for CB Scheme. > > > > 8.3.9: Design evaluation – Forced internal short circuit only applies to > Korea, > > Japan, Switzerland and France. > > > > It is not clear about the enforcement of 8.3.9, because that is country > difference. Can it be enforced for the EU? > > > > Best Regards, > > > > *Jody Leber* > > *Consumer and Retail* > > Global Battery and Accumulator Technical Manager > > Battery and Performance Laboratory Manager > > > Direct: 770.570.1838 > > Main: 770.570.1800 > > Mobile: 678.469.9835 > > > > *From:* Scott Xe [mailto:[email protected]] > *Sent:* Tuesday, April 26, 2016 11:53 AM > *To:* [email protected] > *Subject:* [PSES] EN 62133 2013 > > > > It said this standard comes in force in July 2016. Which directive does > this standard fall into it? > > > > With regards to cl 8.3.9 forced internal short circuit in cells, what is > rationale for this as a country specific test only? > > > > Thanks and regards, > > > > Scott > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > Information in this email and any attachments is confidential and intended > solely for the use of the individual(s) to whom it is addressed or > otherwise directed. Please note that any views or opinions presented in > this email are solely those of the author and do not necessarily represent > those of the Company. Finally, the recipient should check this email and > any attachments for the presence of viruses. The Company accepts no > liability for any damage caused by any virus transmitted by this email. All > SGS services are rendered in accordance with the applicable SGS conditions > of service available on request and accessible at > http://www.sgs.com/en/Terms-and-Conditions.aspx > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
