________________________________ From: Larkin, Matthew<mailto:[email protected]> Sent: 27/04/2016 15:09 To: Scott Xe<mailto:[email protected]>; Leber, Jody (Suwanee)<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: RE: [PSES] EN 62133 2013
Hi Scott From within the standard itself (EN62133:2013) which basically states EN62133:2003 is withdrawn (dow) from 10th January 2016. Best Regards Matthew Matthew Larkin TÜV SÜD Product Service Tel: +44 (0) 1489 558212 From: Scott Xe [mailto:[email protected]] Sent: 27 April 2016 14:34 To: Leber, Jody (Suwanee); [email protected]; Larkin, Matthew Subject: Re: [PSES] EN 62133 2013 Hi Matt, Where did you get dow of 10/01/2016? Thanks and regards, Scott Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Larkin, Matthew [mailto:[email protected]<mailto:[email protected]>] Sent: Tuesday, April 26, 2016 1:54 PM To: Leber, Jody (Suwanee); [email protected]<mailto:[email protected]> Subject: RE: [PSES] EN 62133 2013 Hi Jody The dow date is 2016-01-10; so 10th January 2016 for EN62133 for conflicting National standards to be withdrawn. Best Regards Matthew Sent from my Windows Phone From: Leber, Jody (Suwanee)<mailto:[email protected]> Sent: 26/04/2016 17:58 To: [email protected]<mailto:[email protected]> Subject: Re: [PSES] EN 62133 2013 Hi Scott, I actually thought the dow was in October. Where did you see the July date? I do not believe it is any Directive as most batteries are outside of the scope of the LVD. You will find in end product standards and it is required for CB Scheme. 8.3.9: Design evaluation – Forced internal short circuit only applies to Korea, Japan, Switzerland and France. It is not clear about the enforcement of 8.3.9, because that is country difference. Can it be enforced for the EU? Best Regards, Jody Leber Consumer and Retail Global Battery and Accumulator Technical Manager Battery and Performance Laboratory Manager Direct: 770.570.1838<tel:770.570.1838> Main: 770.570.1800<tel:770.570.1800> Mobile: 678.469.9835<tel:678.469.9835> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
