Hi Scott In relation to EN60950-1 & EN 60065 Annex ZA details normative referenced standards such as EN62133 and how to determine the revision to utilise.
If using a Harmonised standard to assist the demonstration of conformity to a EU Directive the OJ should be used to determined if it is still valid. If a appropriate standard for your product is not detailed in the OJ you may as appropriate use International & National standards etc. A European standard approved by CENELEC has the status of a National standard in member countries. If using a European Standard not listed in the OJ the status of the standard is generally detailed in the standard itself. Best Regards Matthew Matthew Larkin TÜV SÜD Product Service Tel: +44 (0) 1489 558212 From: Scott Xe [mailto:[email protected]] Sent: 27 April 2016 17:14 To: Scott Aldous; Larkin, Matthew Cc: [email protected] Subject: Re: [PSES] EN 62133 2013 Scott & Matt, Thanks for your information. Should we consider in this way that for product scope in EN 60065 or 60950-1, the effective date should follow the publication in OJEU and for batteries, DOW of 10/01/2016 is applied as per standard stated. Currently EN 62133 is not included in LVD or GPSD - of course we cannot find any reference from OJEU. On 27 April 2016 at 23:35, Scott Aldous <[email protected]<mailto:[email protected]>> wrote: See the last paragraph of the Austrian National Foreword in this preview<https://shop.austrian-standards.at/Preview.action;jsessionid=6309A0F60DB57CF4295DE51A402136B7?preview=&dokkey=507572&selectedLocale=en>. I didn't see a similar note in other country national forewards that I could find. On Wed, Apr 27, 2016 at 6:33 AM, Scott Xe <[email protected]<mailto:[email protected]>> wrote: Hi Matt, Where did you get dow of 10/01/2016? Thanks and regards, Scott Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Larkin, Matthew [mailto:[email protected]<mailto:[email protected]>] Sent: Tuesday, April 26, 2016 1:54 PM To: Leber, Jody (Suwanee); [email protected]<mailto:[email protected]> Subject: RE: [PSES] EN 62133 2013 Hi Jody The dow date is 2016-01-10; so 10th January 2016 for EN62133 for conflicting National standards to be withdrawn. Best Regards Matthew Sent from my Windows Phone From: Leber, Jody (Suwanee)<mailto:[email protected]> Sent: 26/04/2016 17:58 To: [email protected]<mailto:[email protected]> Subject: Re: [PSES] EN 62133 2013 Hi Scott, I actually thought the dow was in October. Where did you see the July date? I do not believe it is any Directive as most batteries are outside of the scope of the LVD. You will find in end product standards and it is required for CB Scheme. 8.3.9: Design evaluation – Forced internal short circuit only applies to Korea, Japan, Switzerland and France. It is not clear about the enforcement of 8.3.9, because that is country difference. Can it be enforced for the EU? Best Regards, Jody Leber Consumer and Retail Global Battery and Accumulator Technical Manager Battery and Performance Laboratory Manager Direct: 770.570.1838<tel:770.570.1838> Main: 770.570.1800<tel:770.570.1800> Mobile: 678.469.9835<tel:678.469.9835> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> -- Scott Aldous Compliance Engineer Google 650-253-1994<tel:650-253-1994> [email protected]<mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
