Chris Radek schrieb: > On Sun, Apr 29, 2007 at 10:03:29AM -0500, Chris Radek wrote: >> I don't know what the reference tool would be, and with no >> reference tool I don't know what you'd use to touch-off the work. > > Replying to myself! Is it as simple as > > G49 > insert any tool, touch off, set work coordinate system > start program > program probes first tool, THIS is the reference tool for this run > program saves reference Z coordinate in a variable > cut... > program goes up to tool change height, prompts for next tool > program probes this tool, this - reference => G43 > cut... > ...
Looks exactly like I would want it to work. It would be nice if this could be automated in M06 handling if no tool changer is defined, but any working recipe would work for me I guess. Regards, Sven ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users