Just had word from Arturo, maker of the C11 board that the fequency for full voltage is set to be 25KHz. Will need to investigate why I get nice results with 400Hz...
Kirk Wallace wrote: > On Wed, 2007-12-26 at 23:18 +0100, Geert De Pecker wrote: >> Same here, but then again, the 400 Hz is the maximum needed to get the >> full analog voltage. So no problem here. >> >> The C11 board really needs a frequency, the pulse width is of very >> little influence on the voltage. >> > ... snip > > It is frequency, sort of. For 10Hz a short pulse comes out every 100ms. > For 100Hz, every 10ms and so on up to 10kHz. > You get this: > __-__________-_____ , ___-___-___-_ , _-_-_-_- > Instead of: > __-----______------ , __--__--__--_ , _-_-_-_- > > Just because you have something that works doesn't mean it can't be > broken :) > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users