Aram, Check: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?JogWheel The jog wheel works good. I use the 5i20, 7i33, and 7i37, with Yaskawa drives. Also, I have installed 2 5i20 boards and have an operational test system with 7 motors running. Check: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?FiveAxisGantry I use both ClassicLadder and pyVCP. You are correct about some mainboards pci slots and cable spacing. It gets crowded really fast.
Noel. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Sunday, March 23, 2008 9:43 PM To: Enhanced Machine Controller (EMC) Cc: Enhanced Machine Controller Subject: [Emc-users] 2 boades 5I20 on one computer problem Hi I ask before MESA Electronic about what type of connectors to 5I20 board I should use in order to use 2 boards on one computer. On mother board PSI connectors so close to each other that it is physically impossible to put two boards 5I20 together. So Peter said about special type of connectors and I forgot manufacturers of those connectors. Does any one remember those type connectors that MESA Electronics recommended. Thanks Aram ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users No virus found in this incoming message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: 3/23/2008 6:50 PM No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: 3/23/2008 6:50 PM ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
