Hi Peter. Today i plased order with MESA ELECTRONICS for 1 5i20, 1 7i33, 2 7i37, and those breaker board for Sevodynamis motors. I ask Noel to see what he used in his case. i want to use standard joger wheel with 6 wires, i am not strong to experiment with small motors.
thanks Aram > On Mon, 24 Mar 2008 [EMAIL PROTECTED] wrote: > >> Date: Mon, 24 Mar 2008 19:09:05 -0600 (MDT) >> From: [EMAIL PROTECTED] >> Reply-To: "Enhanced Machine Controller (EMC)" >> <emc-users@lists.sourceforge.net> >> To: "Enhanced Machine Controller (EMC)" >> <emc-users@lists.sourceforge.net> >> Subject: Re: [Emc-users] 2 boades 5I20 on one computer problem >> >> Hi >> I want to ask what kind of breaker board do you use between 7133 and >> your >> 4 motors? > > Nowadays I would use a 7I33T (Has it own breakout with 2X TB24) > > Didn't we make a 7I33 --> Servo Dynamics breakout for you? (50 pin header > to > 4X DB25) > > We probably have about 20 blank boards for that if you need more. > > (if you or anyone else wants one of these _blank_ boards, they are free > for > shipping costs) > > > >> On your description you said that your JOG wheel works well up to >> increments up to 0.010. Close 0.100 jog wheel can not count or so. >> How much cost to you ball screw and mount blocks? >> Thanks > > > I dont recall saying that, just that a small stepper from a 5 1/4" floppy > + a little electronics makes a pretty decent jogwheel. > >> Aram >> >> >>> Aram, >>> Check: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?JogWheel >>> The jog wheel works good. I use the 5i20, 7i33, and 7i37, with Yaskawa >>> drives. >>> Also, I have installed 2 5i20 boards and have an operational test >>> system >>> with 7 motors running. Check: >>> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?FiveAxisGantry >>> I use both ClassicLadder and pyVCP. >>> You are correct about some mainboards pci slots and cable spacing. It >>> gets >>> crowded really fast. >>> >>> Noel. >>> >>> >>> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] >>> [mailto:[EMAIL PROTECTED] On Behalf Of >>> [EMAIL PROTECTED] >>> Sent: Sunday, March 23, 2008 9:43 PM >>> To: Enhanced Machine Controller (EMC) >>> Cc: Enhanced Machine Controller >>> Subject: [Emc-users] 2 boades 5I20 on one computer problem >>> >>> Hi >>> I ask before MESA Electronic about what type of connectors to 5I20 >>> board I >>> should use in order to use 2 boards on one computer. >>> On mother board PSI connectors so close to each other that it is >>> physically >>> impossible to put two boards 5I20 together. >>> So Peter said about special type of connectors and I forgot >>> manufacturers >>> of >>> those connectors. >>> Does any one remember those type connectors that MESA Electronics >>> recommended. >>> Thanks >>> Aram >>> >>> >>> >>> ------------------------------------------------------------------------- >>> This SF.net email is sponsored by: Microsoft Defy all challenges. >>> Microsoft(R) Visual Studio 2008. >>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> No virus found in this incoming message. >>> Checked by AVG. >>> Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: >>> 3/23/2008 >>> 6:50 PM >>> >>> >>> No virus found in this outgoing message. >>> Checked by AVG. >>> Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: >>> 3/23/2008 >>> 6:50 PM >>> >>> >>> >>> ------------------------------------------------------------------------- >>> This SF.net email is sponsored by: Microsoft >>> Defy all challenges. Microsoft(R) Visual Studio 2008. >>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
