On Mon, 24 Mar 2008 [EMAIL PROTECTED] wrote: > Date: Mon, 24 Mar 2008 19:09:05 -0600 (MDT) > From: [EMAIL PROTECTED] > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] 2 boades 5I20 on one computer problem > > Hi > I want to ask what kind of breaker board do you use between 7133 and your > 4 motors?
Nowadays I would use a 7I33T (Has it own breakout with 2X TB24) Didn't we make a 7I33 --> Servo Dynamics breakout for you? (50 pin header to 4X DB25) We probably have about 20 blank boards for that if you need more. (if you or anyone else wants one of these _blank_ boards, they are free for shipping costs) > On your description you said that your JOG wheel works well up to > increments up to 0.010. Close 0.100 jog wheel can not count or so. > How much cost to you ball screw and mount blocks? > Thanks I dont recall saying that, just that a small stepper from a 5 1/4" floppy + a little electronics makes a pretty decent jogwheel. > Aram > > >> Aram, >> Check: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?JogWheel >> The jog wheel works good. I use the 5i20, 7i33, and 7i37, with Yaskawa >> drives. >> Also, I have installed 2 5i20 boards and have an operational test system >> with 7 motors running. Check: >> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?FiveAxisGantry >> I use both ClassicLadder and pyVCP. >> You are correct about some mainboards pci slots and cable spacing. It >> gets >> crowded really fast. >> >> Noel. >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of >> [EMAIL PROTECTED] >> Sent: Sunday, March 23, 2008 9:43 PM >> To: Enhanced Machine Controller (EMC) >> Cc: Enhanced Machine Controller >> Subject: [Emc-users] 2 boades 5I20 on one computer problem >> >> Hi >> I ask before MESA Electronic about what type of connectors to 5I20 board I >> should use in order to use 2 boards on one computer. >> On mother board PSI connectors so close to each other that it is >> physically >> impossible to put two boards 5I20 together. >> So Peter said about special type of connectors and I forgot manufacturers >> of >> those connectors. >> Does any one remember those type connectors that MESA Electronics >> recommended. >> Thanks >> Aram >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft Defy all challenges. >> Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> No virus found in this incoming message. >> Checked by AVG. >> Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: 3/23/2008 >> 6:50 PM >> >> >> No virus found in this outgoing message. >> Checked by AVG. >> Version: 7.5.519 / Virus Database: 269.21.8/1340 - Release Date: 3/23/2008 >> 6:50 PM >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
