Hi All, Due to some health problems, I didn't power up my emc box the last 2 months and when I did last week, ubuntu wanted to install an update which I accepted. Maybe stupid of me ...
When I started emc, the X didn't respond anymore and the Y and Z behaved very erratically. Movement of these two is very unsmooth and it seems the motor receives My config is a cnc4pc breakout board and a recent xylotex 4 axis board. I checked the pulses with the scope and they seem to be very short. As I don't recall how it was before, I can't compare. Basically, my question is if anybody knows that there has been changes in either ubuntu or in emc during the last 4 to 5 months that could explain this? Could also be the xylotex board, but don't know how measure this one. Thanks and regards, Geert ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Register now and save $200. Hurry, offer ends at 11:59 p.m., Monday, April 7! Use priority code J8TLD2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
