On Wed, 2009-04-22 at 18:38 -0500, Chris Radek wrote: > On Wed, Apr 22, 2009 at 02:04:55PM -0700, Kirk Wallace wrote: > > > > I tend to think my threading problem is due to the "relay runner" > > effect > > I think so too - sure looks nasty though. I bet you will have much > better luck with 2.3 (this effect is why I rewrote the threading > sync.)
This is what I got with 2.3.0 and the previous threading sample with 4=0.08333 at 400 RPM: http://www.wallacecompany.com/machine_shop/HNC/HALscope_2.3_threading.png Previous (2.2.8): http://www.wallacecompany.com/machine_shop/HNC/4at083333-2.png 2.3.0 seems to be much better, but the HALscope is still interesting. It seems to get more unstable as the cut progresses? Another note, when I loaded 2.3.0, I got a .axis_preferences file permission error while trying to start EMC2. I rooted, then changed the file owner from root to me. Then my X axis got a homing error, something like "switch inactive before reversal"(?). I reduced the homing rates a little, which did the trick. Now, I have new features and better threading. Thank you. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
