On Mon, 2010-12-13 at 20:39 +0200, Roland Jollivet wrote: > I don't know if it's been pointed out, but those caps on the regulator are > in the wrong place. (on the diagram below)
Oops. That's such a bad mistake, I made myself laugh. Err... I was just testing to see if anyone would notice. This should be slightly better(may need Reload button on browser): http://www.wallacecompany.com/machine_shop/EMC2/Charge%20Pump/chpmp-5c.png I don't know if a real board will ever be made, but being mindful of the pin layout is a good point. Thanks Roland. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Lotusphere 2011 Register now for Lotusphere 2011 and learn how to connect the dots, take your collaborative environment to the next level, and enter the era of Social Business. http://p.sf.net/sfu/lotusphere-d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users