I don't know if it's been pointed out, but those caps on the regulator are in the wrong place. (on the diagram below)
and a trivial point; I don't know how you selected which gate where, but when it comes to laying the board, change inverter number 1-6 to suit the mechanics, and choose tie-up or tie-down on unused inputs according to the closest rail input. Regards Roland On 13 December 2010 19:59, cogoman <cogo...@optimum.net> wrote: > On 12/12/2010 01:49 PM, emc-users-requ...@lists.sourceforge.net wrote: > >> There is then a lot to be said for removing IC1C, so the slow input is > >> > discriminated only once. If pins 1& 3 are then connected, any small > >> > same-chip threshold variation will have negligible effect, because > here > >> > the input flank is rather vertical. > >> > > Dooh, of course. I'll make the change. > > > http://www.wallacecompany.com/machine_shop/EMC2/Charge%20Pump/chpmp-5c.png > > > > > If you're trying to make this circuit more universal, you could put IC1E > on the output of IC1B, and then include a jumper on board so that the > two buffer gates could select inverting or non-inverting polarity to > signal CP-GOOD. I like to include a trace on board selecting one or the > other as standard, and if you want to change it, you cut the trace, and > add a jumper wire. Three extra plated through holes to pay for, but > more universal. > > > ------------------------------------------------------------------------------ > Lotusphere 2011 > Register now for Lotusphere 2011 and learn how > to connect the dots, take your collaborative environment > to the next level, and enter the era of Social Business. > http://p.sf.net/sfu/lotusphere-d2d > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Lotusphere 2011 Register now for Lotusphere 2011 and learn how to connect the dots, take your collaborative environment to the next level, and enter the era of Social Business. http://p.sf.net/sfu/lotusphere-d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
