What output options does the software have? If you can get it to generate a DXF, then you can use one of many DXFtoGCode tools. I have seen similar tools for HPGL output.
On Sun, May 1, 2011 at 8:54 PM, Rogers <prax...@gmail.com> wrote: > Hi everyone, > I have recently installed Cabinet Parts Pro in an effort to use my CNC > router (Joes 4 x 4) to cut out a small kitchen. The software doesn't have > EMC2 listed as a post processor but has many other options. Has anyone ever > used this application successfully with EMC2? if so, id appreciate some > advice please. If anyone knows of an alternative cabinet layout/design app > that might be open source then id like to know about it. I'm using the > older, free version of CPP. > Thanks. > Regards > Neil in Australia > > ------------------------------------------------------------------------------ > WhatsUp Gold - Download Free Network Management Software > The most intuitive, comprehensive, and cost-effective network > management toolset available today. Delivers lowest initial > acquisition cost and overall TCO of any competing solution. > http://p.sf.net/sfu/whatsupgold-sd > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
