On 5/6/11, Rogers <prax...@gmail.com> wrote: > Stuart, Kent, Brian, Kim. > Thank you for the advice and comments. CabinetPartsPro has the following > processors > ... > mach3
Mach3 (and turboCNC) are derivations from the original NIST EMC, whose original goal was actually standardization of data in the manufacturing industry including Gcode aka RS274, so there's a good chance that it'll be close to what EMC2 uses now . Theoretically(*). Does anyone know if that is indeed the case that Mach3 and EMC2 gcode interpreters are essentially similar? p (*) "In theory, the theory describes the real world. In the real world it doesn't." ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
