I agree with Kim. In our EMC2 controlled machines we use programs posted for Haas, Fadal, Fanuc and Yasnac controls.
It takes very little, if any, adjustment to use them in the EMC2 controls. On Tue, May 3, 2011 at 7:17 AM, Kim Kirwan <k...@kimkirwan.com> wrote: > EMC2 gcode isn't too different from Fanuc, maybe you could > select Fanuc output as a test and see how it treats you? > I'll bet it wouldn't take much more fiddling beyond that. > Or maybe you can copy the existing Fanuc settings to new > EMC2 settings and then fiddle with them freely? > > Kim > > > On 05/02/2011 10:54 PM, BRIAN GLACKIN wrote: > > What output options does the software have? If you can get it to > generate a > > DXF, then you can use one of many DXFtoGCode tools. I have seen similar > > tools for HPGL output. > > > > On Sun, May 1, 2011 at 8:54 PM, Rogers <prax...@gmail.com> wrote: > > > >> Hi everyone, > >> I have recently installed Cabinet Parts Pro in an effort to use my CNC > >> router (Joes 4 x 4) to cut out a small kitchen. The software doesn't > have > >> EMC2 listed as a post processor but has many other options. Has anyone > ever > >> used this application successfully with EMC2? if so, id appreciate some > >> advice please. If anyone knows of an alternative cabinet layout/design > app > >> that might be open source then id like to know about it. I'm using the > >> older, free version of CPP. > >> Thanks. > >> Regards > >> Neil in Australia > >> > >> > -- dos centavos ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
