2012/3/21 Alwyn McLeod <mcleod.al...@gmail.com>: > Kirk, Thanks for your insight into the problem as per your recent message > > >> You could just do this: >> Put a M00 on the line right before the TxM6 line. >> When the machine stops at the M00 hit the esc key >> Now jog around,change tools and touch off. reload the tool table. >> I will assume that you are using AXIS so now right click on the >> TxM6 line and it will start from there. >> > I have tried your suggestion and found that by pressing escape after > clicking the TxM6 line and then right clicking, a message flag appears that > says "Start From Here"
Exactly! And that is what You have to select to resume running the code from that particular place. Viesturs > -- > Alwyn McLeod > Cell 073 500 6992 > Fax 086 510 8765 > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
