Very high on my priority list for this summer is a good BBB breakout board. I will be designing for industrial 24v I/O with opto isolation, and may include mosfet h-bridges for driving stepper or servo motors from the TPU's. I haven't started studying the BBB yet to come up with an appropriate design.
-- Ralph ________________________________________ From: Eric Keller [[email protected]] Sent: Tuesday, May 28, 2013 4:01 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Olinuxino/Beagleboard/bone, Xenomai, SPI? On Tue, May 28, 2013 at 6:45 PM, Charles Steinkuehler <[email protected]> wrote: > What sort of break-out board are you wanting to see? Charles, Basically I just want a printer port output. I have thought of just getting one of the proto board capes, but it seems like a BOB interface would be pretty widely used. I think you could run a minimalist 3 axis machine including the gui with a BBB. I have a Shapeoko which would be a great application of a BBB. I hate to admit I don't know how many gpio pins there are available, but I suspect it's more than one BOB worth even with HDMI. Can anyone verify that? Eric ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
