On Mon, Feb 17, 2014 at 5:47 PM, Steve Blackmore <st...@pilotltd.net> wrote:
> > >Sorry, but I don't consider changing the machine to fit the tool to be > >an acceptable solution. > > Then your stuck with a known problematic design. I wish I had a pound > for each complaint/query/moan I've seen and heard about twin steppers on > a gantry machine. > > Other fixes include servos or closed loop steppers but keeping both > sides in synch with software without any feedback is nigh on impossible. > > Steve Blackmore > You won't get any whining, bitching or complaining from me on my twin stepper, gantry setup. Works like a charm, and the machine is designed rigidly enough I never worry about racking. Mark ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
