>>In rotary build up work it is needed to chip this slag off after about two passes, maybe three if you are using 200Amps or more to burn through it.<<
I've never seen that before doing multiple passes with .030 wire and CO2/Argon gas. I work with a company that uses 600 amp sub arcs to do build ups on rotary wheels and that slag falls off by itself by the time the wheel makes a full rotation (wheels are 24" in diameter). They oftentime build up the wheels surface by more than 1/2 an inch. I have a big flux core wire feeders as well (portable suitcase style), one is setup with 1/16" wire and that slag does not peel of by itself (wish it did). The slag is very similar to what occurs with 6011 sticks running on DC current. Very thin. Dave On 8/1/2014 7:32 AM, Ed wrote: > On 07/31/2014 09:42 PM, Dave Cole wrote: >> If you weld with mig with gas (CO2/Argon mixture usually) there is no > The impurities in and on the wire along with oxides on the material will > leave a very light slag. In rotary build up work it is needed to chip > this slag off after about two passes, maybe three if you are using > 200Amps or more to burn through it. This insulating slag will make the > arc dodge around and give a lumpy finish. > > >> slag.. >> >> The cored flux wire will leave slag just like a stick welder. >> >> Dave >> >> > Some flux cored welds are self cleaning if the amps are set just right, > the slag will peel up behind the arc into a nice curl. This works best > in rotary build up work. > > > Ed. > > > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
