Hi all; My ability to run a G33.1 rigid tap routine has suddenly stalled, with all the symptoms indicating that no index pulse from the spindle encoder is getting to its normal motion.spindle-index module pin. Not visible in the halscope, and always false.
Can someone who has been upgrading 2.6.3 on his lathe to the latest as it appears, and who is currently configured so as to be able to run this G33.1 canned cycle, please advise if its still working for you? I was in the middle of building a motor psu big enough to run this 1 HP motor, and installed probably 2 updates to the 2.6.x version without having a motor to test it with. It does the initial move to the start position programmed, and lcnc now just sits there with the G33.1 line highlighted in the axis bottom window, waiting for an index pulse that never comes because its already at a logic zero, false, forever. So if it does work for you, please advise. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce. Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
