On Tuesday 16 September 2014 13:47:58 Peter C. Wallace did opine And Gene did reply: > On Tue, 16 Sep 2014, Gene Heskett wrote: > > Date: Tue, 16 Sep 2014 12:34:09 -0400 > > From: Gene Heskett <[email protected]> > > Reply-To: "Enhanced Machine Controller (EMC)" > > > > <[email protected]> > > > > To: "Enhanced Machine Controller (EMC)" > > <[email protected]> Subject: [Emc-users] Can someone > > do me a favor? > > > > Hi all; > > > > My ability to run a G33.1 rigid tap routine has suddenly stalled, > > with all the symptoms indicating that no index pulse from the > > spindle encoder is getting to its normal motion.spindle-index module > > pin. Not visible in the halscope, and always false. > > > > Can someone who has been upgrading 2.6.3 on his lathe to the latest > > as it appears, and who is currently configured so as to be able to > > run this G33.1 canned cycle, please advise if its still working for > > you? > > > > I was in the middle of building a motor psu big enough to run this 1 > > HP motor, and installed probably 2 updates to the 2.6.x version > > without having a motor to test it with. It does the initial move to > > the start position programmed, and lcnc now just sits there with the > > G33.1 line highlighted in the axis bottom window, waiting for an > > index pulse that never comes because its already at a logic zero, > > false, forever. > > > > So if it does work for you, please advise. > > > > Cheers, Gene Heskett > > If motion.spindle-index-enable is never set true this means the motion > component doesn't think its ready to start a synchronized move, so I > would look at what feeds motion.spindle-at-speed and > motion.spindle-revs
I first fixed the at speed, no biscuit, then found that the net from encoder.position to motion.spindle-revs was on the missing list. Once that was hooked up it was off the the races. So now its in the archive. :) Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
