On Tue, 16 Sep 2014, Gene Heskett wrote:
> Date: Tue, 16 Sep 2014 12:34:09 -0400
> From: Gene Heskett <[email protected]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <[email protected]>
> To: "Enhanced Machine Controller (EMC)" <[email protected]>
> Subject: [Emc-users] Can someone do me a favor?
>
> Hi all;
>
> My ability to run a G33.1 rigid tap routine has suddenly stalled, with all
> the symptoms indicating that no index pulse from the spindle encoder is
> getting to its normal motion.spindle-index module pin. Not visible in the
> halscope, and always false.
>
> Can someone who has been upgrading 2.6.3 on his lathe to the latest as it
> appears, and who is currently configured so as to be able to run this
> G33.1 canned cycle, please advise if its still working for you?
>
> I was in the middle of building a motor psu big enough to run this 1 HP
> motor, and installed probably 2 updates to the 2.6.x version without
> having a motor to test it with. It does the initial move to the start
> position programmed, and lcnc now just sits there with the G33.1 line
> highlighted in the axis bottom window, waiting for an index pulse that
> never comes because its already at a logic zero, false, forever.
>
> So if it does work for you, please advise.
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS
If motion.spindle-index-enable is never set true this means the motion
component doesn't think its ready to start a synchronized move, so I would
look at what feeds motion.spindle-at-speed and motion.spindle-revs
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce.
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
