Standard procedure follow it from the source in hardware all the way to the display wherever it is accessible starting at the easiest point to access.
On Tue, 16 Sep 2014 12:34:09 -0400 Gene Heskett <[email protected]> wrote: > Hi all; > > My ability to run a G33.1 rigid tap routine has suddenly stalled, with all > the symptoms indicating that no index pulse from the spindle encoder is > getting to its normal motion.spindle-index module pin. Not visible in the > halscope, and always false. > > Can someone who has been upgrading 2.6.3 on his lathe to the latest as it > appears, and who is currently configured so as to be able to run this > G33.1 canned cycle, please advise if its still working for you? > > I was in the middle of building a motor psu big enough to run this 1 HP > motor, and installed probably 2 updates to the 2.6.x version without > having a motor to test it with. It does the initial move to the start > position programmed, and lcnc now just sits there with the G33.1 line > highlighted in the axis bottom window, waiting for an index pulse that > never comes because its already at a logic zero, false, forever. > > So if it does work for you, please advise. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce. > Perforce version control. Predictably reliable. > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce. Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
