On Tuesday 16 September 2014 12:43:54 David Armstrong did opine And Gene did reply: > Gene , > are you saying the index pulse is not getting through to motion index ? > have you the index also connected to A ? is this with a 5i25 or parrell > port ? hm2_5i25 I can disconnect the hal coupling between the encoder and motion, set the index-enable true, roll the chuck till the index led lights once, and it then becomes false, but nothing is true in the first place!
> you have of course the counts set at 1 > > if you want to send me a test ngc ,, i'll run it here if it helps PM on the way shortly David, thanks. > > On 16 September 2014 17:34, Gene Heskett <[email protected]> wrote: > > Hi all; > > > > My ability to run a G33.1 rigid tap routine has suddenly stalled, > > with all the symptoms indicating that no index pulse from the > > spindle encoder is getting to its normal motion.spindle-index module > > pin. Not visible in the halscope, and always false. > > > > Can someone who has been upgrading 2.6.3 on his lathe to the latest > > as it appears, and who is currently configured so as to be able to > > run this G33.1 canned cycle, please advise if its still working for > > you? > > > > I was in the middle of building a motor psu big enough to run this 1 > > HP motor, and installed probably 2 updates to the 2.6.x version > > without having a motor to test it with. It does the initial move to > > the start position programmed, and lcnc now just sits there with the > > G33.1 line highlighted in the axis bottom window, waiting for an > > index pulse that never comes because its already at a logic zero, > > false, forever. > > > > So if it does work for you, please advise. > > > > Cheers, Gene Heskett > > -- > > > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > > > -Ed Howdershelt (Author) > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS > > > > > > --------------------------------------------------------------------- > > --------- Want excitement? > > Manually upgrade your production database. > > When you want reliability, choose Perforce. > > Perforce version control. Predictably reliable. > > > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg > > .clktrk _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ----------------------------------------------------------------------- > ------- Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce. > Perforce version control. Predictably reliable. > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.c > lktrk _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce. Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
