Gene , are you saying the index pulse is not getting through to motion index ? have you the index also connected to A ? is this with a 5i25 or parrell port ? you have of course the counts set at 1
if you want to send me a test ngc ,, i'll run it here if it helps On 16 September 2014 17:34, Gene Heskett <[email protected]> wrote: > Hi all; > > My ability to run a G33.1 rigid tap routine has suddenly stalled, with all > the symptoms indicating that no index pulse from the spindle encoder is > getting to its normal motion.spindle-index module pin. Not visible in the > halscope, and always false. > > Can someone who has been upgrading 2.6.3 on his lathe to the latest as it > appears, and who is currently configured so as to be able to run this > G33.1 canned cycle, please advise if its still working for you? > > I was in the middle of building a motor psu big enough to run this 1 HP > motor, and installed probably 2 updates to the 2.6.x version without > having a motor to test it with. It does the initial move to the start > position programmed, and lcnc now just sits there with the G33.1 line > highlighted in the axis bottom window, waiting for an index pulse that > never comes because its already at a logic zero, false, forever. > > So if it does work for you, please advise. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS > > > ------------------------------------------------------------------------------ > Want excitement? > Manually upgrade your production database. > When you want reliability, choose Perforce. > Perforce version control. Predictably reliable. > > http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce. Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
