Question regarding the INI entry regarding tool change on a VMC, TOOL_CHANGE_POSITION, says that this can be combined with TOOL_CHANGE_QUILL_UP, which it looks like TOOL_CHANGE_QUILL_UP will send the z axis to the 0.000" position in absolute coodinates. Our machine is setup so the top of the table is 0.000" and full z up (tool change position) is at 25.000", how do I set the TOOL_CHANGE_QUILL_UP value to be 25.000", or will it use the z value in the TOOL_CHANGE_POSITION?
-- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
