I'm just working off of the machine drawings, All three Cincinnati Milacron VMC's in the shop work this way, table surface is zero, and all Z values are in the positive, until you set zero at the top of the part.
Rick On 4/24/2015 11:16 AM, Chris Radek wrote: > On Fri, Apr 24, 2015 at 11:07:44AM -0400, Rick Lair wrote: >> Question regarding the INI entry regarding tool change on a VMC, >> >> TOOL_CHANGE_POSITION, says that this can be combined with >> TOOL_CHANGE_QUILL_UP, which it looks like TOOL_CHANGE_QUILL_UP will send >> the z axis to the 0.000" position in absolute coodinates. Our machine is >> setup so the top of the table is 0.000" and full z up (tool change >> position) is at 25.000", how do I set the TOOL_CHANGE_QUILL_UP value to >> be 25.000", or will it use the z value in the TOOL_CHANGE_POSITION? > You can't. Instead you should fix your Z so 0 is the top. That is > entirely standard and that's why QUILL_UP expects it. > > > ------------------------------------------------------------------------------ > One dashboard for servers and applications across Physical-Virtual-Cloud > Widest out-of-the-box monitoring support with 50+ applications > Performance metrics, stats and reports that give you Actionable Insights > Deep dive visibility with transaction tracing using APM Insight. > http://ad.doubleclick.net/ddm/clk/290420510;117567292;y > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
