In regards to the "TOOL_CHANGE_POSITION =" entry, I take it that if I have "20 10 25" as the entry, then it will move all three axis at the same time, at a rapid rate, to these positions? These values would center the table on the x and y, and move my z to the tool change position.
Andy, That is fairly accurate, the machine has a 20" working envelope in the Z axis, the way it was setup from Cincinnati Milacron was, the table surface was 0, and when the Z was all the way down, full negative travel, it is actually at +5.000". Then when it is at the tool change position, full positive travel, it is at +25.000" -- Thanks Rick Lair Superior Roll & Turning LLC 399 East Center Street Petersburg MI, 49270 PH: 734-279-1831 FAX: 734-279-1166 www.superiorroll.com ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
