On 13 May 2015 at 15:48, Rick Lair <[email protected]> wrote: > > That is fairly accurate, the machine has a 20" working envelope in the Z > axis, the way it was setup from Cincinnati Milacron was, the table > surface was 0, and when the Z was all the way down, full negative > travel, it is actually at +5.000". Then when it is at the tool change > position, full positive travel, it is at +25.000"
Presumably that is in Machine (G53) coordinates? I am still not really seeing why that coordinate system matters. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
