Hey Drew, I ended up mounting it exactly like the old encoder, in the same cylindrical housing. I only had to machine a new mount for the encoder housing because the disc was smaller diameter so the mount had to raise the encoder a bit compared to the older one. I attached the encoder wheel to the same spindle mount as the old one using the same hardware. I thought I took pictures of it but I can’t seem to locate them. I also thought I had a dxf and gcode for the mount that I made but am having trouble locating that as well. I will see what I can find...
-Tom > On Jan 22, 2016, at 4:50 PM, Drew Rogge <d...@dasrogges.com> wrote: > > Hi Tom, > > How did you end up mounting the new encoder to your EMCO? I'd like to do the > same thing to mine. > > Drew > > On 1/22/16 7:58 AM, tom-...@bgp.nu wrote: >> >> However, I often see videos of machining centers just spinning way a high >> speed tapping like it’s no big deal. Should I be tapping at much higher >> spindle speed in order to have more torque? Will the spindle be able to >> stop and reverse at those speeds to pull it off? I have aggressive >> start/stop settings on the VFD that controls the spindle, the encoder is >> 1024ppr quadrature…. >> >> >> -Tom >> >> >> ------------------------------------------------------------------------------ >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > -- > Drew Rogge > d...@dasrogges.com > > Phone: 8934OOO629OO4829631OOOOOOO > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
