----- Original Message ----- > From: "Gene Heskett" <ghesk...@shentel.net> > To: emc-users@lists.sourceforge.net > Sent: Friday, September 16, 2016 8:46:25 AM > Subject: Re: [Emc-users] Oneshot question > > On Friday 16 September 2016 04:15:07 andy pugh wrote: > > > On 16 September 2016 at 02:06, Gene Heskett <ghesk...@shentel.net> > wrote: > > > Looking at the lut5 modules man page, where it claims all kinds > > > of > > > functions can be performed, I am not grokking what it says. > > > > It allows you to define a single output value for every combination > > of > > the 5 input values. > > That's all. > > If one of the inputs is a raw signal and one is a delayed version, > > and > > if you feed the output back to one of the inputs, then it is > > capable > > of a great degree of subtlety. > > Ok, what I need is a true output for any input condition of i0 and i1 > except i1 true and i0 false. function 0x2, the only answer that > lut5.py > gives you, doesn't do that. I've also tried every function from 0x0 > to > 0xf without finding anything usable. > > So I gave up and used an and2 and a not. That seems to work from an > ssh -Y login. I get a near instant shutdown for a spindle on but > motor > power off. > > Thanks Andy. >
I would have thought that 0xc would have given you the result you wanted (assuming only inputs 0 and 1 are used). ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
