On 02/01/2017 08:13 AM, Kirk Wallace wrote: > On 01/31/2017 03:37 PM, Kirk Wallace wrote: >> A lathe showed up on my doorstep (almost). A friend called up and said >> "I've got a lathe in my trailer and I want to know if I can bring it by >> today." I guess he knows me well enough to know that I could not refuse. >> I have had it a couple of days and I took some time to scrape the first >> layer of grime off of it and take some pictures. >> http://wallacecompany.com/machine_shop/Tida_Samson_TD-1336_lathe/ > > ... snip > > Another thing I'm curious about. I haven't used a D1-4 Camlock before > and I can't seem to find information on how to use it. I did find the > specifications: > http://www.tools-n-gizmos.com/specs/Lathe_Spindle_Mount.html
Another thing came to mind, I placed a 5C collet in the spindle bore and the hole is larger. Is there typically an insert for this bore to adapt to 5C? -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/ ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users