On Wednesday 07 February 2018 14:46:32 Eric H. Johnson wrote:

> All,
>
>
>
> Just this week I started getting TRAM errors on a machine that has
> been running for years. This system uses the Mesa 7i43 card. I had
> this happen once before, but on a new machine with a brand new 7i43
> card. I replaced the card and the problem went away. On this machine I
> replaced the 7i43, and it ran for about 3 hours flawlessly, then the
> TRAM error came back. It so happened that the 7i43 is the 400K version
> and the old one is the 200K, so running a different driver as well.
>
>
>
> Is the problem now likely the parallel port on the motherboard, or is
> there some place else I should be looking. I have disconnected and
> reconnected the cables multiple times, so I doubt that is the culprit.
>
>
>
> Thanks,
>
> Eric

Does it even have motors to rotate the head on a horizontal axis?

>
>
> ----------------------------------------------------------------------
>-------- Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to