On Friday 16 February 2018 02:20:40 jeremy youngs wrote: > Chris, I think you are spot on . Nema 34 1600 oz in. And automation > direct 110v drives.
I have one of those motors. On the Z of my mill, with a 60 volt psu, very poor performance. 27 ipm or stall lifting the head on the G0704. Its now on the sheldons Z and while noisy, is also about 4x faster. > I had y at 300 ipm 9×42 table. It was a very cheap > ballscrew and I had it cobbled together now that the Machine is 3 axis > and spindle functional I will be able to make some belt and pulley > mounts and resolve some issues. > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
