I have not looked at it closely, but here is a plugin for the Cura slicer that sounds like it might be exactly what you need: https://github.com/mtu-most/MOST-delta-stage/blob/master/Welder.py
On Sat, Mar 10, 2018 at 11:16 PM, a k <pccncmach...@gmail.com> wrote: > Hi > Kurt > i did try to use slicing software like kissliser etc. > Problems with doing that: > 1- Slicing software output in addition parameter A or E that control > plastic filament . You can control thickness of deposition with CNC feed > and also with head feed (parameter A or E in some slicing software head > feed parameter A in other E) > How i can take that parameter out of Linuxcnc? a lot of problem/work etc. > 2- Slicing software -- all that look - have max step up in Z direction up > to 0.05 " > for plastic printing it is ok but if one use MIG welder step up can be > between 0.15" and 0.25" > > i try to get hold of people that creating software , but only manage to > talk to sale or technical support people. > aram > > > > On Sat, Mar 10, 2018 at 11:04 PM, Kurt Jacobson <kurtcjacob...@gmail.com> > wrote: > > > Aram, it sounds like you are trying to do some additive manufacturering, > so > > maybe you could use a slicer intended for 3d printing to create the > > program. Slic3r might be configurable enough for what you are trying to > do. > > > > Kurt Jacobson > > 505-303-1933 > > Sent from Mobile > > > > On Sat, Mar 10, 2018, 10:57 PM a k <pccncmach...@gmail.com> wrote: > > > > > Hi > > > Stuart > > > what is --Are you wanting to reverse the tool path of a .ngc-- > > > .ngc ? > > > what i want? > > > i have a 3d solid model > > > i can generate G&M code to machine it. > > > no tool change will be used. > > > just simple machining 3d solid model. > > > Program will start from top and end on the bottom of the part. > > > > > > Now, i want to convert this/generated G&M code in to G&M code that will > > > start motion from the bottom of the part and end on the top of the > part. > > > it be very good if i also can move tool path inside of the part, and > also > > > to i can generate 2 tool path. > > > > > > why do i need that? > > > i did install mig welder gun on my linuccnc machine. i did program 2 > inch > > > by 2 inch cubic model, and it is ok for what i need. > > > > > > thank you > > > aram > > > > > > > > > > > > > > > > > > > > > > > > On Sat, Mar 10, 2018 at 4:06 PM, Stuart Stevenson <stus...@gmail.com> > > > wrote: > > > > > > > Aram, > > > > > > > > What are you wanting exactly? Can you describe just what you want to > > see? > > > > Most any CAM packages can generate code in whatever direction you > want. > > > > > > > > Are you wanting to reverse the tool path of a .ngc file you didn't > > > generate > > > > with a CAM package? > > > > > > > > thanks > > > > Stuart > > > > > > > > On Sat, Mar 10, 2018 at 1:20 PM, a k <pccncmach...@gmail.com> wrote: > > > > > > > > > hi > > > > > in there world of CAD CAM software, is there a software that can > > > > generate G > > > > > code path in reverse motion? > > > > > Or is there small CAD CAM company that can add such capability? > > > > > this is intricate capability for specialty use. > > > > > in the big company one will be able to talk to sale or tech > support. > > > > > impossible to talk to software creating person /personal. > > > > > > > > > > thank you > > > > > aram > > > > > ------------------------------------------------------------ > > > > > ------------------ > > > > > Check out the vibrant tech community on one of the world's most > > > > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > > > _______________________________________________ > > > > > Emc-users mailing list > > > > > Emc-users@lists.sourceforge.net > > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > > > > > > > > > > -- > > > > Addressee is the intended audience. > > > > If you are not the addressee then my consent is not given for you to > > read > > > > this email furthermore it is my wish you would close this without > > saving > > > or > > > > reading, and cease and desist from saving or opening my private > > > > correspondence. > > > > Thank you for honoring my wish. > > > > ------------------------------------------------------------ > > > > ------------------ > > > > Check out the vibrant tech community on one of the world's most > > > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > > _______________________________________________ > > > > Emc-users mailing list > > > > Emc-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > ------------------------------------------------------------ > > ------------------ > > > Check out the vibrant tech community on one of the world's most > > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
