On Thursday 09 August 2018 07:23:58 Mark wrote: > On 08/07/2018 08:22 PM, jrmitchellj wrote: > > Joint 2 error on a 2 axis machine, hmm. > > Would it only have joint 0 & 1? > > Is it possible you opened a 3 axis config? > > > > J. Ray Mitchell Jr. > > > > “No thief, however skillful, can rob one of knowledge, and that is > > why knowledge is the best and safest treasure to acquire.” > > > > -L. Frank Baum > > I should have mentioned the two axes are X and Z. X is axis/joint 0 > and Z is axis/joint 2. > > Mark > That may work, the skipping of Y, but it may also be part of the problem. Is lathe defined in the .ini file?
> ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
