On Thursday 09 August 2018 08:59:59 Mark wrote: > On 08/09/2018 08:31 AM, Gene Heskett wrote: > > On Thursday 09 August 2018 07:23:58 Mark wrote: > >> On 08/07/2018 08:22 PM, jrmitchellj wrote: > >>> Joint 2 error on a 2 axis machine, hmm. > >>> Would it only have joint 0 & 1? > >>> Is it possible you opened a 3 axis config? > >>> > >>> J. Ray Mitchell Jr. > >>> > >>> “No thief, however skillful, can rob one of knowledge, and that is > >>> why knowledge is the best and safest treasure to acquire.” > >>> > >>> -L. Frank Baum > >> > >> I should have mentioned the two axes are X and Z. X is axis/joint > >> 0 and Z is axis/joint 2. > >> > >> Mark > > > > That may work, the skipping of Y, but it may also be part of the > > problem. Is lathe defined in the .ini file? > > It's not a lathe, it's a saw beveler
I know, I was here when you were building it, but for some reason I thought you were writing about a different machine. Can I blame it on oldtimers? Or as you stated in an earlier msg, CRS? BTDT, several times myself... > with a long X axis and a short Z > axis. It's worked that way for over 10 years now. In the docs, The Z > axis is called Axis 2. The Y axis is Axis 1 and the X axis is Axis > 0. There is no Y axis to define in the ini or hal files. > > Mark > > > > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
