> -----Original Message----- > From: TJoseph Powderly [mailto:tjt...@gmail.com] > Sent: Thursday, March 21, 2019 7:32 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] mister nozzle shape > > a quick google reminded me why this was familair > try googling 'spray nozzle' > i got > https://en.wikipedia.org/wiki/Spray_nozzle > and it showed me that the flat surface exit made NO atomization > thats not what you want, sorry > ( i was trying to achieve the jumping water effect seen in many fountains > and that flat exit was great for the hot dog of water effect ) > if you want the fluid stream broken into tiny droplets , > the web page lists a lot of geometries to try > tomp > > On Thu, Mar 21, 2019 at 10:50 AM Gene Heskett <ghesk...@shentel.net> > wrote: > > > On Wednesday 20 March 2019 21:29:19 TJoseph Powderly wrote: > > > > > Hello Mr Nozzle shape > > > > Did not get any useable hits on this side of the pond. URL? > > > > Cheers, Gene Heskett
Thanks for the link. Sometimes Googling for the obvious terms gives the best results! _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users