Some guy on the internet had the same issue with a similar printer and wrote a blog post about it. See here:
https://letsprint3d.net/how-to-calibrate-the-extruder-steps-ender-3-5-cr-10/ > OK, bottom line, if you say "110%" you are just adding a 10% bump to the > rules the slicer uses. I would only do that if using undersize filament > or if the printer has 10 undersized rollers in the extruder. But errors > so large or unheard of. 2% or 3% maybe at most. > > > >> Whats the steps/mm for the >> extruders default on your printer? cura is set to 110% flow, and default >> extruder/mm is 94.50/mm at the printer. >> >> Got to something wrong someplace >> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
