On Tue, Jun 16, 2020 at 10:18 PM Gene Heskett <ghesk...@shentel.net> wrote:
> > Yup. And it was, feeding about 44mm for 100mm commanded. > > Sounds like a clogged nozzle or maybe just needs to be hotter. Or maybe the temperature sensor is uncalibrated. Using less filament than commanded means it is slipping on the feed rollers. There is a pressure adjustment. On my printer it is a screw with a spring and you adjust it to control pressure on the rollers. But these are the kinds of details that vary from one printer to the other. If this is a mechanical issue you shouldn't try and compensate with a software setting. I'm lucky and never once even after printing many spools of plastic had even one clogged nozzle. Being so lucky means I have zero experience with the problem. But I'd think it is not easy to clear it as it would be filled with hard plastic. -- Chris Albertson Redondo Beach, California _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
