I should also note I made an error in my revolutions calculation. It should be RPM / 2 / 60 sec * deceleration time = revolutions to stop, assuming linear deceleration. That’s probably the default for most drives. For 560 RPM, that comes out to 2.8 revolutions. So my observations at 2.9 revolutions are consistent with that.
Who is in charge of the integrator’s manual? I’d like to investigate writing some additional sections. Thanks, Matt _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users