On 07/23/2020 05:21 AM, Matthew Herd wrote:
I should also note I made an error in my revolutions calculation. It should be
RPM / 2 / 60 sec * deceleration time = revolutions to stop, assuming linear
deceleration. That’s probably the default for most drives. For 560 RPM, that
comes out to 2.8 revolutions. So my observations at 2.9 revolutions are
consistent with that.
Who is in charge of the integrator’s manual? I’d like to investigate writing
some additional sections.
You can submit suggested changes to John Thornton, or get
commit access yourself.
Jon
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users