On Saturday 14 November 2020 06:52:37 Johann Beukes wrote: > Hi boys > I dont want to hijack the post but I cant get to remove myself from > the mailing list. I tried numerous times to unsubscribe via the link > and got confirmation mails but I still get mails from emc. > Can someone help me please
Did you reply to the confirmation emails? Generally it won't be done until you do. > > On Sat, 14 Nov 2020, 13:46 Gene Heskett, <ghesk...@shentel.net> wrote: > > On Saturday 14 November 2020 01:16:46 Gregg Eshelman via Emc-users wrote: > > > I always used a bench vise to crimp 40 pin floppy, 34 and 80 pin > > > IDE, and 50 pin SCSI IDC connectors onto ribbon cable. Never had a > > > problem. > > > > I have a 2" $70 Gibralter with very flat jaws. Does a great job of > > crimping. A year and 2-3 disconnects later, the cover is warped up > > in the middle and theres no connection for the 3 or 5 wires in the > > middle. Recrimp it and set your clock for 6 months. Wash rinse and > > repeat. I'm obviously tired of it. > > > > I just bought, cuz I couldn't find the smaller rated one, a 2.2KW > > 110 volt, 4 bearing water cooled motor with an ER20 collet, this > > ER11 is very hard to get a 1/4" tool into it. To replace the 1 HP > > rated one that is 95% plugged up. Its sitting there, with the pump > > running, and a fresh paper filter, passing about a coffee cup of > > water in about 5 long minutes. The week old distilled water is > > turning a very faint tellow. I think because of the iron cap on the > > paper filter. > > > > I'm going to use it if it survives, to cut out the motor mount half > > moons for the BS-1. But first I seem to have used up all my > > 357/LR44 batteries for digital calipers, so I've got to wait for the > > drug store to open and go get some more. Both motors are 80mm > > motors. My theory is that I've already programmed the current > > limits of this 1 HP rated motor into the 1.5 HP rated vfd and the > > vfd will self protect itself from a slightly hungrier motor. If > > not, they sell them on ebay. > > > > This will be a longer test of my mister kit on the 6040, that's 1/2" > > thick alu plate and it will be gnawing 2, 62mm holes for starters. > > Should have quite a pile of swarf to suck up. > > > > Stay well everybody. > > > > Cheers, Gene Heskett > > -- > > "There are four boxes to be used in defense of liberty: > > soap, ballot, jury, and ammo. Please use in that order." > > -Ed Howdershelt (Author) > > If we desire respect for the law, we must first make the law > > respectable. - Louis D. Brandeis > > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
